Mini Motor Geared Motors and Motors

Mini Motor Geared Drives and Reducers

R.M. Hoffman is Mini Motor's EXCLUSIVE distributor in California!

Motors and geared motors available in numerous configuration options such as: AC or DC power, electromagnetic brake, worm gear (right-angle) or helical gear (inline/coaxial) primary reduction, planetary second reduction. Many IP67 rated models are available for food and beverage industry applications.

Geared Motors:



Available for AC or DC motors Available with 230 Vac or 24 Vdc normally closed (failsafe) electromagnetic brake Totally enclosed with external ventilation IP65 protection (dust tight, protected against water jets) Class F windings rated for temperatures up to 311°F (155°C) in 104°F (40°C) ambient Single or three-phase asynchronous AC motors: From 1/56 horsepower to ½ horsepower output Nominal speed ratings from 1440 rpm to 3240 rpm 230 Vac or 460 Vac (60 Hz) power supply Permanent magnet DC motors: From 1/20 horsepower to 1/5 horsepower output Speed ratings from 2800 rpm to 3550 rpm 12 Vdc or 24 Vdc power supply Inline helical or worm drive reduction Inline (coaxial) helical gear reduction: 29 gear ratios available from 6.48 to 441.9 Torque output ratings up to 177 lb-in Max output shaft load ratings of up to 135 lb axial, 270 lb normal Roller bearings Worm gear reduction (right angle): 14 gear ratios available from 7 to 100 Torque output ratings up to 177 lb-in Hardened steel worm with ground thread Max output shaft load ratings of up to 180 lb axial, 225 lb normal Ball and roller bearings Aluminum Casing Synthetic oil lubrication Long-life lubrication Special rubber sealing rings for high temperatures Available with planetary gear second reduction 5:1 and 4.75:1 ratios available (up to 2209.5:1 total reduction) Torque output ratings up to 797 lb-in Max output shaft load ratings of up to 337 lb axial, 674 lb normal Steel casing

Also available for food and beverage industry applications:


IP67 protection (dust tight, submersible in water up to 1 meter) Class H windings rated for temperatures up to 356°F (180°C) in 104°F (40°C) ambient Stainless steel output shaft available Lubricated with long-lasting non-toxic oil Special white rubber sealing rings for high temperatures

Motors:

Single or three-phase asynchronous motors
Available with 230 Vac or 24 Vdc normally closed (failsafe) electromagnetic brake
Totally enclosed with external ventilation
IP65 protection (dust tight, protected against water jets)
Class F windings rated for temperatures up to 311°F (155°C) in 104°F (40°C) ambient
Max output shaft load ratings of 9 lb axial, 124 lb normal
Single phase models
- From 1/56 horsepower to 1/3 horsepower output
- Torque ratings from 0.62 lb-in to 6.28 lb-in
- Nominal speed ratings from 1440 rpm to 3240 rpm
- Starting torque from 0.71 lb-in to 3.98 lb-in
- 230 Vac (60 Hz) power supply
Three-phase models
- From 1/56 horsepower to ½ horsepower output
- Torque ratings from 0.62 lb-in to 8.50 lb-in
- Nominal speed ratings from 1440 rpm to 3240 rpm
- Starting torque from 1.42 lb-in to 25.67 lb-in
- 460 Vac (60 Hz) power supply

Respective Drives:


Electronic speed variator for single phase asynchronous motors Speed control Variation range from 0 to 3360 rpm Repeatability of 0.1%	Static frequency converters for three phase motors Position and speed control Power output up to 1700 Volt-Amperes Frequency variation as wide as 0 to 142 Hz Motors up to 740 W (1 horsepower) Over 90% efficiency at rated current

Approved Quality and Safety

Product quality and safety are Mini Motor’s primary targets to ensure customer satisfaction. Mini Motor has demonstrated its constant commitment in maintaining the production system quality standards through ISO 9001- 2000 certification, which substitutes and integrates the previous UNI EN ISO 9001 standard dated 1994. All Mini Motor products are cCSAus approved (Canadian Standards Association), for both the Canadian and American markets. Mini Motor products have an IP65 protection rating, subject to IEC EN 60529 standards, thanks to the manufacturing methods followed and the attention to quality of the parts used.